8 inch / 250mm / 12 inch Interchangeable Aluminum Platens A versatile compact, convertible design grinding/polishing machine can be configured, as required, with an 8 inch. (203mm), 250mm or 12 inch (305mm) diameter grinding or polishing platen. To change the configuration, simply remove the insert and lift the platen from the retaining pegs located on the platen base and replace with the new platen size and insert.
The platen base of the Labpol 8-12 has a 0.4HP (0.3KW) motor and controller operating at variable speed between 50-500 rpm.
8 inch (203 mm) Aluminum Platens A twin disc polishing machine with a low profile front deck includes two 8 inch (203mm) Extec aluminum platens and two platen guards. The machine operates at variable speeds between 50-500rpm with the set speed on a front display panel.
A water lubrication inlet and outlet are located on the rear panel. A control tap and flexible hose is located beside each platen so that water can be directed to any part of the platens during pregrinding.
Extec is pleased to announce the addition of the Labpol 12-3DI Automatic Polisher/Grinder with an integrated three unit electronic dispenser. This unit comes with one set of (6) adapters. The unit can be run with only one sample or as many as six and does not require leveling/loading fixture. Optional: Magnetic Stirrer
The Labpol 12-3DI Auto Polisher/Grinder is an advanced design of Automatic Polisher/Grinder in which polishing or grinding protocols can be created as a program by entering the required parameters on a keypad and then stored for future use.
The EXTEC Labcut 1010 Low Speed Diamond Saw is a convenient preparation instrument in the laboratory and is designed for the precision cutting of a wide variety of materials. Samples can be cut with minimal damage and deformation. The universal design cuts fragile and soft materials that cannot be handled by standard high speed cutoff machines. Variable wheel rotation speeds range from 0 to 500 rpm for precise cutting. A variety of sample holders are available, making the Labcut 1010 even more versatile. This includes the rapidcut precision attachment which reduces the cutting time and gives a high quality surface finish.
A unique ion beam based sputter coating system producing continuous, ultra thin, amorphous coatings free of thermal artifacts making them ideal for FESEM and TEM applications. This is an important advantage over traditional coating techniques such as thermal evaporation, magnetron or RF sputtering that produces coarse deposition structures.
The Gatan ion beam coater offers convenience, efficiency and dependability in a compact, bench-top instrument. It produces ultra-fine grained/amorphous and artifact free coatings for the more demanding high-resolution field-emission microscopes. Specimens are coated quickly with negligible specimen heating.
The ideal instrument for any application requiring slope cutting, sample etching and/or high-resolution sputter coating. The PECS™ is a unique ion beam based etching and sputter coating system producing exceptionally large, clean, viewable areas of specimens for Scanning Electron Microscope (SEM), Transmission Electron Microscope (TEM) and Light Microscope (LM) applications. The unique design features incorporated into the PECS™ make it very versatile.
Features:-